Fusion Tape
Pipe Repair Tape
Fusion Tape™ won’t crack or separate with sudden shock, vibration, expansion or contraction, making it an easy, secure long-term solution to tears and rips in wires, pipes and hoses.
This heavy-duty, self-bonding, self-fusing, seamless silicon tape is not tacky and requires no heat or tools to promote fusion.
- Bonds into a permanent, inseparable, cohesive insulator at room temperature.
- Has a dielectric strength of 400 volts/mil and works over a wide range of temperatures.
- Can also be used as a primary cable insulation where Class H temperatures (180°C/356°F) are present.
- Resists moisture and ozone, making it an excellent environmental insulator.
Click below to view the individual product data sheet:
Need Help?
Questions? Call us for technical support, product information or help with any questions.
| Operating Temperatures (Intermittent): | -85°F to 500°F (-65°C to 260°C) |
| Operating Temperatures (Continuous): | -76°F to 392°F (-60°C to 200°C) |
| Dielectric Strength, Minimum: | 400 volts/mil (.020” thick) |
| Dielectric Constant, 1 KHz: | 2.95 |
| Dissipation Factor, 1 KHz: | <.0004 |
| Volume Resistivity: | 3 x 1014 ohms/cm |
| Cold Brittle Point, Maximum: | -65°C |
| Water Absorption: | 3% maximum by weight |
| Tensile Strength: | 700 psi minimum |
| Ultimate Elongation: | 300% minimum |
| Tear Resistance: | 85 ppi |
| Durometer Hardness: | 50 Shore A room cured 24 hours |
| Meets or Exceeds: | U.S. Military Spec A-A-59163 (formerly MIL-I-46852C) Type II Triangular Guideline and Type I, Rectangular, Self-fusing silicone rubber tape. |
