AP125 Adhesion Promoter

Pipe Repair Adhesion

Our adhesion promoter is a two-part acrylic-based adhesive (1:1 ratio by volume) that can bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and TPOs without special surface preparation.

It enhances the bond between Stop It®’s resin and plastic or fiberglass pipes and will be required for applications involving these substrates.

Ability to bond dissimilar substrates
Ability to structurally bond polyolefins
Room temperature cure
Excellent water and humidity resistance
Very good chemical resistance
One-step Process – no pre-treatment of the polyolefin substrates needed
Solvent-free adhesive system
Convenient hand-held applicator system
Available in Bulk

Product ImagePipe Repair Adhesion Promoter 125

Click below to view the individual product data sheet:

AP125 Adhesion Promoter Data Sheet

Need Help?

Questions? Call us for technical support, product information or help with any questions.

Technical Specifications
Shelf Life: 6 months @40°F
Physical Form: Two-part, solvent-free resin system
Mixing Ratio: 1:1
Working Time: 6–8 minutes
Mixed Viscosity: 60,000 cps
Application Thickness: <0.02”
Coverage: Each 50 mL cartridge coats ~250 in 2 at the recommended thickness; 400 mL cartridge coats ~2000 in2
Water Resistance: High
Chemical Resistance: Very Good