AP125 Adhesion Promoter
Pipe Repair Adhesion
Our adhesion promoter is a two-part acrylic-based adhesive (1:1 ratio by volume) that can bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and TPOs without special surface preparation.
It enhances the bond between Stop It®’s resin and plastic or fiberglass pipes and will be required for applications involving these substrates.
Features:
Ability to bond dissimilar substrates
Ability to structurally bond polyolefins
Room temperature cure
Excellent water and humidity resistance
Very good chemical resistance
One-step Process – no pre-treatment of the polyolefin substrates needed
Solvent-free adhesive system
Convenient hand-held applicator system
Available in Bulk
Click below to view the individual product data sheet:
Need Help?
Questions? Call us for technical support, product information or help with any questions.
Shelf Life: 6 months @40°F
Physical Form: Two-part, solvent-free resin system
Mixing Ratio: 1:1
Working Time: 6–8 minutes
Mixed Viscosity: 60,000 cps
Application Thickness: <0.02”
Coverage: Each 50 mL cartridge coats ~250 in 2 at the recommended thickness; 400 mL cartridge coats ~2000 in2
Water Resistance: High
Chemical Resistance: Very Good
