Stop It© Pipe Repair Clamps
Specialty Pipe Repair Clamps
The Stop It® Pipe Repair Clamp conforms to most irregular surfaces and controls most pressures with simple hand-tightening – a simple solution for not-so-simple situations.
The polytetrafluoroethylene (PTFE) gasket on these stainless steel clamps provides extraordinary chemical resistance and works in temperatures ranging from -450°F to +650°F so you can place it and forget about it. The clamps can also be combined to fit pipes with larger diameters.
Click below to view the individual product data sheet:
Need Help?
Questions? Call us for technical support, product information or help with any questions.
Technical Information
Physical Properties
Adjustment Range: 6” (15.2 cm) down to ½” (1.2 cm)
Materials: Band and housing made of corrosion resistant 301 CRES. Heat-treated alloy screw and nut are cadmium.
| Temperature range: | -450°F to 600°F (-268°C to 316°C) |
| Octagon Size: | 1” (2.54 cm) |
| PTFE Thickness: | 1/8” (0.31750 cm) |
| Pressure Retention: | Approximately 300 PSI when tightened with a hand tool. (Note: Make sure that pipe is in proper condition before applying any type of clamp.) |
| Inert to all Chemicals: | Only molten alkali metals and elemental fluorine will affect this material. |
