Induron’s Fastprime is a fast dry, rust preventative primer available in red or gray-green. This primer is made with high quality alkyd resins and pigments to provide exceptional corrosion resistance and adhesion to carbon steel and cast iron with minimal surface preparation. This primer can be top coated with alkyd enamel finishes and is formulated to comply with Steel Structures Painting Council Painting System Guide No. 7.00 Section 5.1.3.
Airless Spray—Use .013-.017 tip; 60 mesh filter; 30:1 pump ratio at 50-80 psi operating air pressure. Conventional Spray—Follow instructions of equipment manufacturer for the application of alkyd primers. Roll—Not recommended. Limit to very small areas for touch-up. Brush—Not recommended. Limit to very small areas for touch-up.
Click below to view the individual product data sheet or safety data sheet: