E-Bond 100 Penetrating Sealer
An ideal coating for top coating a wide range of previously painted surfaces.
E-Bond 100 Penetrating Sealer is the perfect primer for concrete, masonry, and marginally prepared steel. This low viscosity, two component epoxy is specially formulated to penetrate and seal concrete, masonry, rusted steel and most chalked coatings. When you need to lockdown and seal your substrate, E-Bond 100 is a truly unique product to get the job done. It is available in amber clear and non-opaque off-white. When used as recommended, it is 100% solids, zero VOC, and will not shrink or entrap solvent upon curing. When used on concrete E-Bond will mitigate outgassing and improve adhesion of subsequent coatings. Many other products which are used in this manner require extremely small range for the thickness at which they are applied, typically 0.5 – 1.0 mils DFT, because they become so slick and hard at higher thicknesses. E-bond 100 will not create adhesive issues in this manner. Therefore, realistic application thicknesses can be achieved without worry.
The very low surface tension and penetrating properties of E-Bond 100 will bond rust, penetrate discontinuities and holidays in old coatings and provide exceptional adhesion to any aged, corroded, or rusted substrate. The penetrating action will reinforce and bond heavy rust. When blasting is not practical or economically feasible, E-Bond 100 seals and unifies the surface of the substrate allowing the application of an appropriate coating system. E-Bond 100 will penetrate concrete, mitigating outgassing and improves the bond of epoxy topcoats. E-Bond 100 will perform as a one-coat sealer for concrete floors, sealing out oils and gas and making clean-up easier. E-Bond 100 is ideal as a primer for masonry swimming pools.
Topcoat with Induron epoxies, urethanes, Aquanaut II and Induraguard 9200.