Perma-Clean II Semi-Gloss Epoxy

Photo Coming Soon

A two-component, high solids, highly cross – linked , chemical and corrosion resistant, modified polyamidoamine epoxy formulated for excellent protection of steel, masonry and nonferrous metals in corrosive environments. This epoxy uses a specially modified polyamidoamine curing agent which imparts the best properties of both amines and conventional polyamides. For maximum benefit, use as part of a system featuring Perma-Clean II Primer and Perma-Clean II High Gloss. Perma-Clean II may be topcoated with Induron urethanes, fluorourethanes and epoxies. This product meets the requirements of ANSI/AWNA 0102-11 Outside System No.5 for the first and intermediate coat. This product meets the requirements of the Food Safety and Inspection Service of the U. S. Department of Agriculture as chemically acceptable for use in areas where there may be a possibility of incidental food contact.

Applications

Airless Spray—Use .017-.021 tip; 60 mesh filter; 30:1 pump ratio at 60-100 psi operating air pressure.
Conventional Spray—Follow instructions of equipment manufacturer for the application of epoxy paints.
Roll—Use lambswool cover. Additional coats may be required to achieve desired film thickness.
Brush—Use natural bristle brush. Additional coats may be required to achieve desired film thickness.

Click below to view the individual product data sheet or safety data sheet:

Need Help?

Questions? Call us for technical support, product information or help with any questions.